AX2 Flanged Axial Bellow
Designed to accept linear expansion on copper and stainless steel pipe systems. Standard product details are shown below, although these may vary dependant upon application and PED requirements.
- Flanges: Carbon steel PN16 with stainless steel facings (stainless steel to all wetted areas)
- Convolutions: 316 stainless steel
- Internal Sleeve: 316 stainless steel
- Pressure: 16 Bar
- Temperature: 120 OC
- Test: 5x working
All bellows supplied by Shawston are manufactured and certified in accordance with EU PED legislation and as such carry the relevant CE certification where required.
The anchor loads generated by this type of axial expansion compensator are high. A bracket guide with a low frictional resistance should be used.
Please note these units are not suitable for use on a drop rod system and need to be suitably guided using a low friction slide guide, or roller chair and guide. Please contact Shawston Technical Department for positioning of anchors and subsequent support centres.
- Requires full guiding.
- Available for any temperature or pressure.
- Supplied with CE certs where applicable.
- Internal flow liner as standard.
- Bellows are pre-cold drawn.
|CODE||Size (mm)||Axial Compression (mm)||Installed Length||Effective Area CM2||Force to Compress N/mm|
|EXAX2035||32nb / 35cu||30||130||14||39|
|EXAX2042||40nb / 42cu||30||130||20||53|
|EXAX2054||50nb / 54cu||50||225||32||53|
|EXAX2067||65nb / 67cu||50||225||49||91|
|EXAX2108||100nb / 108cu||50||230||124||121|
|EXAX2133||125nb / 133cu||60||240||180||117|
|EXAX2159||150nb / 159cu||60||240||262||173|